Tabla de contenido
Publicidad
Enlaces rápidos
Model #
833Wd
Coronado Bench
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions and Finishing
Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand in or on this piece
of furniture.
Do not overload bench.
Periodically check to ensure the lid support is
functioning properly.
All hardware provided must be attached to ensure
proper, safe operation.
WARNING: TO AVOID RISK OF SUFFOCATION,
DO NOT ALLOW CHILDREN TO PLAY INSIDE
THIS UNIT.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Before beginning your project, completely read
both the Assembly Instructions and Finishing
Hints.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°.
(Not on a cold, possibly damp cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws or any other problem which may
affect the stability of your piece.
Production Code:
VN
We will replace any
1/09
Publicidad
Tabla de contenido
Manuales relacionados para Whittier Wood Furniture 833Wd Coronado
Resumen de contenidos para Whittier Wood Furniture 833Wd Coronado
- Página 1 Model # 833Wd Coronado Bench Service Policy: We will replace any Assembly Instructions parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
-
Página 2: 833Wd Coronado Bench
— Parts List 833Wd Coronado Bench Before beginning assembly, identify each part and make sure quantities received match what’s on this list. If you need to replace a part, please refer to the following list for its name and letter. -
Página 3: Tools Required
833Wd ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Hex Wrench (provided), Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue Fig. 1 Spread a thin film of glue in the dowel holes in the Back Panel (Dd) and Front Panel (Ed). Insert Bottom Support (Hd) and gently tap with a padded hammer. Using the pocket drilled holes as guides, attach with two #8x1¼"... -
Página 4: Bottom View
Fig. 3 Bottom view Slide Bottom (Fd) into grooves in Front and Back Panels (Dd and Ed). See Figure 3. Fig. 4 Spread a thin layer of glue in the dowel holes in the Right Leg Assembly (Id) and attach to the bench assembly. - Página 5 Fig. 5 5. Spread a thin layer of glue in the two dowel holes on the bottom of the Seat Assembly (Bd). Place the Seat Assembly over the dowels on the Back Panel (Dd) and quickly wipe away excess glue with a damp rag. See Figure 5. Fig.
- Página 6 Fig. 7a Fig. 7 7. The long arm of the Lid Support (N) must be attached to the Seat. Position the Lid Support (N) over the predrilled holes in the Back Panel and Seat. Attach using four #5x5/8" Flat Head Screws (J).
- Página 7 Modelo # 833Wd Banco Coronado Normas para obtener servicio: Reemplaza- Instrucciones para Armar remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
-
Página 8: 833Wd Banco Coronado
833Wd Banco Coronado LISTA DE PIEZAS Antes de comenzar a armar el banco identifique cada pieza y verifique que las cantidades de piezas recibidas coinciden con las de esta lista. Si tiene que reemplazar una pieza le rogamos que consulte el nombre y la letra de la misma en la lista siguiente. Cant. - Página 9 No. de modèle 833Wd Banc Coronado Politique de service : Nous remplacerons Instructions de Montage toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
-
Página 10: 833Wd Banc Coronado
833Wd Banc Coronado NOMENCLATURE DES PIÈCES Avant de commencer le montage, identifiez les pièces et assurez-vous que les quantités reçues correspondent à celles de cette liste. Si vous devez remplacer une pièce, veuillez vous référer à la liste suivante pour le nom et la lettre de la pièce. Qté. - Página 11 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
- Página 12 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.