Tools Required - Whittier Wood Furniture 833Wd Coronado Instrucciones Para Armar

833Wd ASSEMBLY INSTRUCTIONS
Hex Wrench (provided), Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue
Ed
Fig. 1
1. Spread a thin film of glue in the dowel holes in the Back Panel (Dd) and Front Panel (Ed).
Insert Bottom Support (Hd) and gently tap with a padded hammer. Using the pocket drilled holes
as guides, attach with two #8x1¼" Pan Head Screws (O). See Figure 1.
Dd
Ed
Fig. 2
2. Spread a thin layer of glue in the dowel holes in the Left Leg Assembly (Ad). Insert the
the Upper Back (Cd), Back Panel (Dd) and Front Panel (Ed) and gently tap with a padded
hammer. Quickly wipe away any excess glue with a damp rag. Using the provided Hex Wrench
(Pd), attach with six ¼"x63mm Hex Screws (Ld). See Figure 2.

TOOLS REQUIRED:

Dd
O
Cd
Hd
O
Ad
Ld
Ld
Pd
833Wd – Page 3
x 2
x 6
x 1
1/09
—