Millipore Millex SLGS 033 SS Guia Del Usuario página 11

Millex (33 mm) Filter Unit with MF-Millipore Membrane
Specifications for Millex (33 mm) Filter Unit with MF-Millipore Membrane
Materials
Dimensions
Temperature limit
Housing burst at 25°C 150 psig (10 bar) inlet maximum
Filtration volume
Hold-up volume
Connections
Sterilization method EO gas
Flow rate at 25°C
Millex-GS filter unit: Typical initial flow rate for water at 30 psig: 75 mL/min
Millex-HA filter unit: Typical initial flow rate for water at 30 psig: 180 mL/min
Millex-AA filter unit: Typical initial flow rate for water at 30 psig: 450 mL/min
Mixed esters of cellulose nitrate and acetate membrane;
Acrylic housing
inlet to outlet 26 mm (1.02 in)
diameter 33 mm (1.30 in)
filtration area 4.52 cm
pore size Millex-GS filter unit: 0.22 µm
Millex-HA filter unit: 0.45 µm
Millex-AA filter unit: 0.80 µm
45°C (113°F) maximum
10 mL to 100 mL
≤ 0.1 mL after air purge
Female Luer-Lok™ inlet; male Luer-slip outlet
2 2
(0.70 in )
7