Height Adjustment; Maintenance; Disposal At End Of Life; Technical Details - Vermeiren 9063 Manual De Instrucciones

EN
NL
• Pour some water in the upper edge of the
bucket. The bucket is then sealed airtight
against bad odours when the lid is closed.
4.1

Height adjustment

1. Remove clip (1).
2. Adjust the leg to the
PL
desired position (2).
CS
3. Mount clip (1).
Make sure that all four
legs are well secured.

5 Maintenance

5.1 Cleaning
Use a soft, damp cloth and lukewarm water
with a mild household soap to clean the toilet
chair. Avoid soaking. Do not use abrasive
cleaning agents to clean.
5.2 Disinfection
CAUTION
Disinfections may only be undertaken by
trained persons. Consult your specialist
dealer.
Use a soft, damp cloth and lukewarm water
with a mild household disinfectant to clean the
toilet chair.
Toilet buckets and cushioned seats are not
meant to be treated hygienically.
5.3 Inspection / Service / Repairs
The toilet chair must be checked at least every
second year by authorised persons/specialist
dealers, and at least every time before
resuming its use. The following parameters
must be checked:
• Check the frame for plastic deformation
and reduced functioning.
• Visual inspection of damage to the
paintwork (danger of corrosion)
• Check the condition of the cushions (tears,
brittleness, soaking)
Risk of damage
• Bucket sealing (not in the case of re-using)
• Rubber tips on legs: no missing or
damaged tips
• Completeness of consignment ?
• Instruction manual available?
The service should only be confirmed in the
"Service plan" if at least the above aspects
have been checked. If your specialist dealer
does not undertake the services which you
require, kindly contact the manufacturer. We
will gladly refer you to authorised specialist
dealers in your vicinity.
Replacement parts can be obtained from your
specialist dealer.
5.4 Reuse
Before each reuse, have the toilet chair
disinfected, inspected and serviced according
to the instructions in this chapter.
5.5

Disposal at end of life

At end of life, you need to dispose your toilet
chair according to the local environmental
legislation. The best way to do so, is to
disassemble the toilet chair to facilitate the
transport of recyclable parts.

6 Technical details

Brand
Type
Model
Description
Max. load
Total height
Seat height
Overall width
Seat width
Distance between
armrests
Backrest height
Overall depth
Seat depth
Armrest to seat
distance
Weight
We reserve the right to introduce technical
changes.
Measurement tolerance +/- 15 mm / 1,5 kg / 1,5°.
2
2021-06
Vermeiren
Toilet chair
9063
Dimensions
120 kg
755 - 885 mm
470 - 560 mm (without
cushioned lid)
490 - 580 mm (with
cushioned lid)
620 mm
430 mm
470 mm
400 mm
650 mm
450 mm
215 mm (without cushioned lid)
195 mm (with cushioned lid)
ca. 9 kg
9063