Overload Indication - Linea 2000 DOMO DO9158W Manual De Instrucciones

BATTERY
2 pcs of AAA 1.5V battery.
REPLACING THE BATTERY
Open the lid of the battery compartment at the bottom of your scale.
Place 2 x 1.5V AAA batteries in the compartment, with the plus side at the + sign.
First place the flat side of the battery against the spring and then push the other side
down.
OPERATION
1. Put the scale on a hard and flat surface to guarantee the accuracy of the scale.
Avoid carpet or soft surfaces and make sure that there is nothing underneath the
scale.
2. Gently step on the scale. Put your feet evenly on the scale without moving. The
scale turns on automatically.
3. Wait until your weight shown on the display is stable and locked.
AUTOMATIC SWITCH OFF
When you step off the scale, it will automatically switch off. Auto shut-off occurs
approximately 8 seconds after a stable weight is reached.
CHANGE THE WEIGHING UNIT
The scale has the possibility to display the weight in kilo's (kg) or pounds (lb).
1. Press the button on the bottom of the scale when the scale is
turned on. The current weighing unit will now be indicated on
the display.
2. Press the button again to change the weighing unit.

OVERLOAD INDICATION

"Err" code indicates scale overload.
LOW BATTERY INDICATION
"Lo" code is shown when battery power is low. Please install new battery.
ERROR DURING WEIGHING
"C" code is shown when an error occurs during weighing. Step back on to the scale to
weigh again.
19
DO9158W