König Electronic CMP-MINIPROJ10 Manual página 4

Connecting to a VGA Port
- The mini projector can accept a 15-pin VGA source from a laptop's external VGA port or from a
graphics card from a computer. Then select the "VGA PC" option in the main menu of the mini
projector to receive the VGA signal.
- The maximum resolutions are:
Attach VGA cable here
Connecting an Audio/Video Input Device
- The mini projector can accept different A/V sources trough the A/V port at the back of the device.
These sources are connected trough a 3.5mm A/V cable.
- The maximum supported resolutions are:
- To connect an A/V cable, insert the 3.5mm portion into the A/V port of the mini projector. Then select
the "A/V input" icon in the main menu.
- You can connect a device via the composite connection. The cable is included with the device.
800x600 dpi (native/optimal)
1024x720 dpi
NTSC: 720x480 dpi
PAL: 720x576 dpi
4