Jensen RBTTX10 Guia De Inicio Rapido página 3

3. Charge the transmitter/receiver
Option 1: Transmitter Mode
1. Slide the transmitter/receiver switch on
the front of the transmitter/receiver to
TX.
2. Use the included 3.5mm audio cable
to connect the transmitter/receiver
to your audio source (a computer, TV,
MP3 player, etc.).
NOTE: Before the next step, turn off Bluetooth
on your phone or other device you use wirelessly
with your Bluetooth speaker or headphones.
This will keep your speaker or headphones from
automatically pairing to your phone when you turn
them on (and allow it to pair to the transmitter/
receiver).
3. Turn on your Bluetooth speaker or
Bluetooth headphones and place it
next to the transmitter/receiver.
4. Press and hold the
top of the transmitter/receiver for 2-3
seconds to turn it on.
The transmitter/receiver's transmitter
indicator blinks rapidly while it's trying
to connect to your Bluetooth speaker
or headphone. In a few seconds it
auto-pairs with your Bluetooth speaker
or headphone, and the transmitter
indicator turns solid blue.
5. Start playing audio on your audio
source. Your Bluetooth speaker or
headphones plays the audio wirelessly.
button on the
1
2
3
4
3