Auto-Reconnect - Jensen RBTTX10 Guia De Inicio Rapido

Bluetooth wireless connection tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters).
This range may vary, however, based on other factors, such as room layout, wall material,
obstacles, your device's Bluetooth performance, etc. If you're having problems connecting to
the speaker, move closer to it.
• If your device asks you for a password to connect, use "0000".
If you're having trouble reconnecting, try the following solutions:
• Find the device named Jensen RBTTX10 in the Bluetooth menu on your phone, and remove
(or forget) this device. Then start the pairing process described in this section again to re-pair
and connect.
Using the Transmitter/Receiver

Auto-Reconnect

In receiver mode, Bluetooth auto-reconnect depends on your
phone, tablet, or gaming system.
In transmitter mode, the transmitter/receiver will attempt to
reconnect automatically when you turn it on. If it doesn't find
a previously paired device, the transmitter/receiver will go into
pairing mode to set up with a new device.
Low Battery Warnings
The transmitter/receiver tells you when it needs to be recharged.
In transmitter mode, the blue indicator blinks rapidly when
the battery is low.
In receiver mode, the green indicator blinks rapidly and
transmitter/receiver announces "low battery."
See instructions for charging on page 2.
5