Listening To Your Ipod; Using The Auxiliary Input; Operating The Radio; Adjusting The Volume - Logitech Pure-Fi Anytime Manual Del Usuario

Listening to Your iPod

TM
To listen to your iPod:
1. Plug your iPod / iPhone into the Universal Dock.
2. Using the iPod, select the songs you want to listen to.
3. Press Play on your iPod.
Logitech Pure-Fi Anytime will automatically turn on,
™
switch to the iPod input and start playing.
Note
• You can navigate through your playlist directly on the iPod or by using the |7 8|buttons.
iPod Playlist Presets
You can use the preset buttons to launch playlists on your iPod. To do so, create playlists on your iPod named '1',
'2', and '3'. Pressing a preset button will launch the playlist with the same name – in shuffle mode.

Operating the Radio

Your Logitech Pure-Fi Anytime includes both AM and FM radios. To listen to the radio:
™
1. Press Source ( ) repeatedly – until either AM or FM is active.
2. Use the |7 8|buttons to change the station.
Note
• To automatically scan for the next station, press and hold the |7 8| buttons until you hear a beep.
Radio Presets
To save a station as a preset:
1. Change to the desired station.
2. Press and hold the desired preset button (1, 2, or 3) until you hear a beep.
To change to a preset station:
1. Press Source ( ) repeatedly – until either AM or FM is active.
2. Press the desired preset button (1, 2, or 3).
3
English

Using the Auxiliary Input

To use the 3.5mm auxiliary input:
1. Connect your source device to the auxiliary input.
2. Press Source ( ) repeatedly until the auxillary input is active.
3. Press Play on your source device.
Note
• Depending on your source device, you may need to purchase an adapter cable.

Adjusting the Volume

To adjust the system volume:
1. Use the volume buttons ( )
4
English