RAM Audio Pi Serie Manual De Empleo página 13

Installation and
Operation
5.2 AMPLIFER Tab:
GAIN: to select amp gain (26dB to 44dB)
BRIDGE: to configure a pair of channels in Bridge mode
0dB FS IN (optional): to adjust the input digital reference
5.3 PASSWORD Tab:
GENERAL PASSWORD: to enable/disable the general password.
When enable you have to introduce a 4-digits password and con-
firm it. When it is active user will limit the access to the amp
through the screen and RAM_OCS PC software
5.4 ETHERNET Tab:
Dynamic IP / SubNet Mask: information of the current IP address
AUTO IP: to enable/disable the dynamic IP function:
- When Auto IP is enabled, amp will receive an IP from an external
DHCP server. When no DHCP server is present in the network,
amp will self-asignate an IP with the Zero config protocol.
- When Auto IP is disabled, you have to manually configure IP
selecting each IP number and changing it with the encoder. To
finish press the button APPLY IP.
5.5 RESET Tab:
FACTORY RESET: to reinstate initial factory parameters.
Caution! All the amp configurations and libraries will be lost.
12
Instalación y
operación