Kohler K-12150 Guia De Instalacion página 6

6. Install the Tissue Holder
Start a setscrew into the setscrew hole in each post. Do not thread
fully into the post.
Position the escutcheons, if included, onto the wall plates.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
Install the tissue holder post onto the wall plate.
Tighten each setscrew.
Insert the spindle into the tissue holder assembly.
7. Install the Towel Arm
Start the setscrew into the setscrew hole in the post. Do not
thread fully into the post.
Position the escutcheon, if included, onto the wall plate.
Install the towel ring post onto the wall plate.
Tighten each setscrew.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
1013264-2-C
Towel Arm
Anchors
Large Mounting Hole
Screws
Escutcheon
Bonnet
Wall Plate
Towel Arm
Setscrew
6 Kohler Co.