Operating Instructions; Powering On And Off - Kobalt KWL 0080-06 Manual Del Usuario

OPERATING INSTRUCTIONS

3. POWERING ON AND OFF

a. To turn the work light ON, install the battery pack
or connect the power source, and then press the
ON/OFF switch (E). The work light will be turned
on at maximum brightness.
b. To reduce the brightness, press the ON/OFF
switch (E) again.
c. To turn it OFF, press the ON/OFF switch (E) a
third time.
WARNING
Do not continue to press the ON/OFF switch (E)
after the work light has automatically switched off.
The battery can be damaged.
Note: Hanging hook (BB) can be used for hanging on
2x4 inch.
4. SWIVELING THE LIGHT HEAD
a. Hold the auxiliary handle (D) and unlock the right
and left knobs (A).
b. Turn the light head to the necessary position and
then tighten the knobs.
3a
E
E
3b
E
E
4
360°
D
9
Connect
the power
source
BB
E
Install the
battery
pack
A