EAS ELECTRIC EMIH900-FX Manual página 52

Ocultar thumbs Ver también para EMIH900-FX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control ,
and a indicator next to the key will flash
4. Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within
1 minute, the Induction hob will
automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time
during cooking.
If the display flashes
setting
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
alternately with the heat
15
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido