Before You Begin; Screws - Freedom Vinyl Privacy Gates Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
• Not pool code approved.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
Fence
Top View of Routed Post Top View of Routed Post
Emblem/Everton Gate
Component list:
Description
Boards
U-Channels
Top Rail
Bottom Rail
Gate Uprights
Upright Inserts
Upright Caps

Screws

Vinyl Cement
Boerboel Hinges
®
Boerboel Latch
®
2
Purchased
Stiffener
Upright
Inserts
U-Channel U-Channel
Hinges Hinges
Screws
Vinyl
Cement
TOOLS/MATERIALS NEEDED:
Emblem/Everton Panel
Phillips Screwdriver
Safety Glasses
Line Level
Tape Measure
Drill
#2 Square Drive Bit
2" Wood Blocks
⁄ ⁄ ⁄ ⁄ " Bit
3 3 3
32 32
Square
Pencil
Top Rail
Boards Boards Boards Boards Boards Boards
Bottom Rail
Upright
Cap
Latch
Gate
Upright