Application; Safety Precautions; Faults And Damage - Ecom Lite-Ex PL 10e Instrucciones De Uso

1. Application

The Lite-Ex PL 10e is a compact, robust and easy-
to-use LED flashlight for industrial application in
Ex-hazardous areas classified as Zone 2, 1 and 0,
as well as Zone 22, 21 and 20, in accordance with
directive 1999/92/EC (ATEX).

2. Safety precautions

These operating instructions contain information
and safety regulations which are to be observed
without fail for safe operation in the described
conditions. Non-observance of this information
and these instructions can have serious
consequences or it may violate regulations.
Please read these operating instructions
carefully before starting to use the unit!
In case of any doubt (in the form of translation or
printing errors) the English language operating
instructions shall apply.

3. Faults and damage

If there is any reason to suspect that the safety of
the unit has been impaired, it must be withdrawn
from use and removed immediately from the Ex-
area. Measures must be taken to prevent it from
being restarted accidentally.
We recommend that the unit is returned to the
manufacturer for inspection.
The safety of the unit may be compromised, if,
for example:
• there is visible damage to the housing.
• the unit has been subjected to excessive loads.
• the unit has been improperly stored.
• the unit has been damaged in transit.
• unit markings or inscriptions are illegible.
• malfunctions occur.
• permitted limit values have been exceeded.
4