Ecom Ex-PMR 2000 Instrucciones De Uso página 32

Man-down alarm (dead man's switch)
The integrated man-down alarm enables the user to conduct safety-critical
lone work. Press the pre-programmed button „Man Down" to activate this
function or programme the radio unit so that this function is activated when
the radio is switched on.
The radio unit will emit a warning sound within a predefined period of time if
it is located in a horizontal or inward-inclined position. If it maintains such a
status within a preset time, it will automatically change to the emergency call
mode. The radio unit must be brought back into a vertical position to shut off
the alarm.
Monitor/noise limiter OFF (squelch)
Press the pre-programmed button „Monitor" to switch off the noise limiter and
press it again to switch it back on.
Scan
Press the pre-programmed button „Scan". The scanning process starts from
the current channel and the channel number of the scan list increases. The
LED display flashes green in the scanning mode or it illuminates continuous-
ly when a signal or compatible signals are received on the channel. Press the
scan button again to switch off the scan mode.
Whisper mode
Press the whisper mode button („Whisper") in order to be able to be clearly
understood when speaking quietly. Press the button again to switch off this
function.
Voice-operated transmission (VOX)
Press the pre-programmed VOX button to activate the VOX function. When
the VOX function is activated the user can transmit a message without kee-
ping the PTT button depressed (only possible directly on the unit).
Lease mode
In the lease mode the unit is only set for use during a certain period of time.
By pressing the pre-programmed lease button the unit specifies the remai-
ning time acoustically („1","2", „3", „4", „5"). The lease time can be defined
via the software.
32