Repair; Disposal - Ecom Lite-Ex PL 10 H Instrucciones De Uso

a groove underneath the protective disc / only use original
sealing rings from ecom). When replacing the lamp head
on the LED housing make sure the seal and disc are seated
properly. After assembly no part of the seal should be visible
through the opening where the beam is emitted. If the inner
lamp head or lens has been damaged, the lamp should be
sent to the manufacturer for repair.
Fig. 3

9. Repair

Repairs are to be conducted by ecom instruments GmbH
or by personnel or service centres authorised by ecom
instruments GmbH, because the safety of the unit needs to
be tested after repairs are implemented.

10. Disposal

Old electrical devices as well as „historical" old electrical
devices from ecom instruments GmbH are supplied for
disposal at our expense and disposed of free of charge in
accordance with European Directive 2002/96/EC and the
German electrical law of 16/03/2005. The costs associated
with returning devices to ecom instruments GmbH are to
be borne by the sender.
In accordance with Article 1, Section 18 and Article 2 of the
Act Revising the Law of Waste-Related Product Responsibi-
lity for Batteries and Accumulators dated 25 June 2009, we
are obligated to provide the following information.
Your device contains an alkaline battery.
24