Temperature Control; Indicator Lights; Leveling Instructions - Danby DCFM036C1WDB DCFM050C1WDB Manual Del Propietário

OPERATING INSTRUCTIONS

TEMPERATURE CONTROL

The temperature of the appliance is controlled
by setting the thermostat dial on the front of the
cabinet.
• The number 1 indicates the warmest setting. The
number 5 indicates the coldest setting.
• The number 3 setting should be suffi cient for
regular home use.
• The temperature range of the appliance is
approximately -12°C to -30°C (10.4°F to
-22°F).
• To stop the cooling function, turn the dial to the
"OFF" position.

Indicator Lights

There are two LED indicator lights on the
temperature control panel.
Red LED: Indicates that the appliance is currently
connected to the power supply.
Green LED: Indicates that the compressor is currently
in operation. Hearing noises from the appliance
when the compressor is operating is normal.

LEVELING INSTRUCTIONS

There are two adjustable feet on the bottom of the
cabinet that can be adjusted to ensure that the
appliance is level. To level the appliance:
1. Turn the adjustable foot counter-clockwise until
the top of the foot is touching the bottom of the
cabinet.
2. Slowly turn the adjustable foot clockwise until the
appliance is level.
Notes:
• The temperature inside the appliance can
vary based on ambient room temperature, the
frequency that the lid is opened and the amount
of fresh food that has recently been added to the
appliance.
• Do not overload the appliance as this can affect
performance.
• Do not freeze large quantities of fresh food at
the same time.
4
Power Run