Temperature Control; Door Handle Installation - Danby DCF090B1WM Manual Del Propietário

OPERATING INSTRUCTIONS

TEMPERATURE CONTROL

1. Temperature Indicator: The thinner side of the
line indicates warmer temperatures. The thicker
side of the line indicates colder temperatures.
2. Quick Freeze Indicator: Activating the quick
freeze option will run the appliance continuously
for 52 hours. This option can be used when a
large amount of fresh food is added at the same
time.
3. Temperature Setting Button: Press this button
repeatedly to increase the set temperature. If this
button is pressed enough times it will activate the
quick freeze option.
4. Run Indicator Light: This light will illuminate
when the compressor is running.
5. Power Button: Press this button to turn the
appliance on or off.
1
4

DOOR HANDLE INSTALLATION

To install the door handle, follow the instructions
below.
1. Remove 4 screws and the handle from the
2. Remove the handle cover from the accessory
3
2
Notes:
• The temperature inside the appliance can
5
• Do not overload the appliance as this can affect
• Do not freeze large quantities of fresh food at
• In the event of a power failure, the appliance
• When there is an error in the temperature
4
accessory bag. Attach the handle to the door
using the screws.
bag. Press the handle cover over the handle until
it clicks
1
2
vary based on ambient room temperature, the
frequency that the lid is opened and the amount
of fresh food that has recently been added to the
appliance.
performance.
the same time.
will return to the previous setting when power is
restored.
sensor, the temperature indicator bar will fl ash
every second from left to right.