Publicidad
Idiomas disponibles
Idiomas disponibles
- Detach cover
on the left and right side.
- Press in locking mechanism
and remove cover upwards.
- Detach right fairing in area
and remove.
- Detach left fairing in area
and remove.
- Drill assembly holes
using corresponding drill bit to 4.5 mm dia-
meter (pre-drill to 1 - 2 mm).
- Pull protective fi lm off the tank pads (included).
- Mount left tank pad
on left side fairing.
Pins rest in the holes.
NOTE
The numbers are at the front in the direction of travel.
8
Publicidad
