BLACK&DECKER BPWH84W Manual Del Instrucciones página 24

SET UP & USE
Step 4: Select your desired cycle and options
Step 5: Start the cycle
Press the START/PAUSE button to start the washing cycle. When the
washing cycle begins, the Estimated Time in minutes for the cycle to
complete will show and count down in the digital display. Or, if Delay Start
is set, the display will count down the hours until the cycle begins, and then
change to a minute countdown for the cycle.
WARNING: When the washer is running, you should pause the program and
Page 24
Select your desired wash program:
01 (Normal), 02 (Cotton), 03 (Gentle), 04 (Speed Wash), 05
(Spin), 06 (Whites), 07 (Heavy Soil), 08 (Tub Clean). The digital
display will show the number you have selected.
Select the load size based on 01 (Small), 02 (Medium), and 03
(Large) loads
If you would like to add additional rinse times press and hold Rinse
+ for 3 seconds to activate. Press again to select either 2, 3 or 4
rinse cycles.
To delay the start of your washer from 2-24 hours press the Delay
Start button for 3 seconds to activate. You will see a 2 on the
digital display indicating the wash cycle will start in 2 hours. 1 hour
will be added to the start time each time you press the Delay Start
button up until 24 hours.
wait for the tub to stop completely before you open the lid.