GENERAL
Ideal for parties and lodging houses.
Lights up with a very bright bulb: G4 12V 5W
Rotation in free direction with a small motor
TO CHANGE THE BULB
Please replace the BULB follow the diagram below:
Step 1: Disconnect the power to the disco ball by
unplugging the plug.
Step 2: Hold the middle part with one hand and unscrew
the top part by turning it anti-clockwise.
Step 3: Remove the old bulb from the lamp-socket.
Step 4: Replace a new bulb into the socket.
Step 5: Replace the top part and connect the plug again.
CAUTION
Put the Disco Ball on a flat and firm place.
Indoor Use Only
User's Manual
4
E N