Black+Decker MCD900BBD Manual De Uso Y Cuidado página 9

BOIL
1. If making pasta, wait until the water is boiling to add the pasta.
2. Add water and ingredients (depending on recipe) to the cooking pot
and cover with glass lid.
3. Plug in the appliance. The default display (----) will flash on the screen.
4. Click the Boil button once.
5. After Boil is selected the display will show a default time of 30 minutes.
(00:30) This display will be flashing as it is not yet the set time. To
adjust the cooking time press the arrows to increase
6. Once the time is selected or if the default time is selected, press the
Start/ Stop button and the unit will beep once. The time (all digits and
colon) will read solid (not flashing). The unit is now warming up.
7. When the temperature of the unit reaches 212°F the time on the display
will begin to count down. The only item flashing will be the colon
between the 2nd and 3rd digit. The unit will beep twice to signal that
the boiling temperature has been reached.
PRECISION ROAST
1. Place roasting rack in the cooking vessel.
2. Place seasoned cuts of meat and/or cut up vegetables on the roasting
rack in the cooking pot and cover with glass lid.
3. Plug in the appliance. The default display (----) will flash on the screen.
4. Click the Precision Roast button once. The display will change to a
flashing reading of 400°F, the default temperature. To adjust the
temperature, click or hold down the arrows to increase
. The Temperature will have a range of 150°F to 420°F in this
function. During the temperature selection the display remains flashing.
5. The default cooking time is 1 hour and 30 minutes (01:30). To adjust,
press the Time button then click or hold down the arrows to increase
or decrease
6. Once the time is selected or if the default time is selected, press the
Start/Stop button and the unit will beep once. At this point, the time
on the display will no longer flash. The only item flashing will be the
colon between the 2nd and 3rd digit.
7. When the time is up the unit will beep three times. After the cooking
cycle is complete the unit will automatically switch to Keep Warm. The
display will start counting up from zero to 4 hours (00:00 to 04:00).
8. When the timer reaches 4 hours of being on Keep Warm, the unit will turn
the power off and return to the default display of flashing dashes (----).
NOTE: Do not hold foods on Keep Warm for more than 4 hours.
. The maximum time is 20 hours (20:00).
or decrease .
or decrease
9