Storage; Tool Indications And Warning Signals - Volpi KV500 Manual Del Usuario

15.5 Fixed blade replacement
•
Follow the procedure at par. 15.3 for moving blade replacement up to point (12).
•
Remove fixed blade screw (1) and pull out the fixed blade (2):
• Repeat the inverse procedure to reassemble the tool.

16. Storage

•
Don't disport the battery to hot or cold environment.
•
Remove the battery from the device if storage for a long time.
•
Storage the battery and charger into box to keep it away from hot temperature, dust and humidity.
Check switch is in OFF position before storage.
•
Battery should be stored in dry environment, see below:
Storage less than 1 month
Storage less than 6 month
Storage over 6 month
•
Battery should be kept at least at 1.5m from any possible flammable
•
Maintain the battery; please full charging before storage, charging battery every 6 months when
storing for a long time.
•
Don't operate switch at storage.

17. Tool indications and warning signals

17.1 Indication of charger
LED
Three squares green
Two squares green
One squares green
One squares red
Charger
Indication
Red
Green
-20°C ~ +60°C
-10°C ~ +35°C
0°C ~ +30°C
Li-Battery
Battery capacity
80%-100%
50%-80%
30%-50%
Below 30%
Situation
Charging
Charging finished
substance.
Voltage
34 V <Vcc ≤ 42 V
Vcc ≤ 34 V
37