Stiga SENSORSCOPE T1830 Manual Del Usuario página 8

SENSOR TIME DURATION SETTINGS MODE
IMPORTANT! We do not recommend changing the settings T1, T2, or T3 below.
Wrong settings will cause sensor accuracy issues. If any values are changed
and need to be reset change the value to the listed "Default" value to reset.
To enter the Sensor Time Duration Settings Mode long press "START" button (2
seconds). Use Home +/-to navigate to the available settings. Use Away +/- to change
selected setting.
Following is an explanation of the available settings:
T1 : Bounce Sensor Response Time
Range 1 to 50
Default = 8 (0.16 seconds)
This setting controls the response time for both bounce sensors when a ball bounces
onto table top. 1 unit equals to 0.02 seconds. For example, value set to 10 means
bounce response time is 0.2 seconds.
T2: Net Sensor Response Time
Range 1 to 99
Default = 10 (1 second)
This setting controls the response time for the net sensor when a ball hits the net. For
example, a value of 10 means netting response time is 1 second.
T3: Scoring Determination Time
Range 1 to 99
Default = 20 (2 seconds)
This setting controls the time used to determine if a player has scored. 1 unit equals to
0.1 second. For example, set value to 10 means scoring response time is 1 second.
T4: Pick Up Ball Time
Range 1 to 99
Default = 30 (3 seconds)
This setting is the time allowed between last ball scoring and next ball service. During
this time, any serve will not register. 1 unit equals to 0.1 second. For example, set
value to 50 means pick up ball time is 5 seconds. If you find yourself waiting to serve
set T4 to a lower number if you are registering hits while you are passing the ball
between serves set T4 to a higher number.
All Rights Reserved
©2014 Escalade Sports
8
For Customer Service Call 1-800-457-3373