Speedlink Medusa Instrucciones De Manejo página 13

5. Connecting the headset to a DVD player:
1. Plug the mains adapter into the "DC socket" on the back of the amplifier box
and insert the mains plug into a power socket.
2. Connect cable B as shown in fig. 2 to the original output cable of your DVD
player. Make sure the colour markings on the input and output agree in each
case.
3. Connect cable B to the "5.1 Ch Audio Input" socket on the back of the amplifier
box.
4. Connect cable A to the "5.1 Ch Audio Output" socket on the back of the
amplifier box.
5. Connect the other end of cable A to the 3.5 mm RCA connector of cable C.
6. Connect cable C to your hi-fi or other system.
7. Connect the headset to one of the two sockets on the front of the amplifier
box.
6. If you do not want to connect an audio system to the amplifier:
1. Connect cable C to your DVD player and connect the other end to cable A.
2. Connect cable A to your amplifier box.
Fig. 3
13
D
GB
F
E
I
Fig. 2