Filter Installation - PURIFY F Serie Manual De Usuario

FILTER INSTALLATION

Open the device:
SERIES F
Press the middle of front
panel to make the upper
button out of its position.
SERIES K
Pull out the front panel
Removing the filters from the plastic bag:
• Remove the front cover.
• Remove the filter.
• Take the filter out of the packaging.
• Make sure to remove plastic bag off the filter before use.
Installing the filter and front cover
• There are differences between the inside and the outside of the dust filter 1 (antibacterial cotton filter
and HEPA filter). Attention: The side with a handle should be placed outwards
• There are differences between the inside and the outside of the absorption filter 2 (Cellular -Activated
Carbon Filter and cold catalyst filter). Attention: The side with a handle should be placed outwards
• There are differences between the inside and the outside of the front filter (pre-filter). Attention: The
side with a handle should be placed outwards
• Install the front cover. Attention: The machine will not run if the front panel is uncovered.
Filter 1
HEPA
Filter 1
HEPA
ITA EN
Filter 2
CARBON
Filter 2
CARBON
04
Pre-Filter
Pre-Filter