Troubleshooting - Eureka HELIOS Serie Instrucciones De Manejo

ATTENTION
Maintenance must be performed only by trained technicians, authorised by the
producer.
ATTENTION
Do not perform any approximate maintenance and always use original spare parts.
7

TROUBLESHOOTING

GRINDER CONDITION
When starting by means of the
key (4), the display does not
turns on.
If the problem persists, contact trained personnel.
20
CAUSE
Coffee containers (2) not inserted
or not inserted properly.
Request of burr replacement.
The operation of the grinder is
not jeopardised, but the outcome
could not be optimal.
This message is also shown for
some seconds every time the
grinder is switched on, while
the light remains on even
during operation.
POSSIBLE SOLUTION
Check the position of the coffee
container (2) and insert it
properly.
Contact a skilled technician for
replacement of the burrs.
After replacement, reset the
counter in the maintenance
screen of the burrs and set
the size and the type of burrs
installed.
EN