Grinder Description - Eureka HELIOS Serie Instrucciones De Manejo

EN
3

GRINDER DESCRIPTION

1. Lid hopper
2. Coffee beans hopper
3. Regulation knob
4. Power button
5. Filter-holder fork
4 SETTING AND USE
4.1 PREPARATORY OPERATIONS
It is necessary to set up the grinder before working with it, considering the kind of coffee
(more or less roasted) and the grinding type.
• In case you are using metal cans, install the adapter in the joint slot (Fig.2) or use the
adapter via the screw (Fig.3). Then, install the hopper in the right spot (Fig.4).
• In case of coffee-beans hoppers (2), install it in the right spot (Fig. 5).
• Take off the lids (1) from the hopper (2) and fill it up with coffee beans.
• Install back the lid (1) and push the tab (9) so to let the coffee beans pass trough.
ATTENTION
When you take off the coffee beans hopper (2) while the grinder is on, the display
is switching off and so does the grinder. When you install back the hopper, the
display turns on, and so does the grinder.
4.2 SWITCHING ON THE GRINDER
Press the button (4) to switch on the grinder (the led button is switching on).
At first, the grinder is set in the mode originally set by the company. Then, it will
always keep the same mode previously set before switching off.
When you switch it on, the operation screen will appear on the display.
6. Micro-switch
7. Coffee outlet
8. Touch-screen display
9. Opening/closing tab for coffee beans
13