Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the monitor base
To assemble the monitor base:
1.
Connect the base with the monitor. A click shows that the base has
been connected successfully.
2.
Adjust the monitor to the angle that is most comfortable for you.
•
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
1 1 1 1 1
Connecting the cables
Connect the cables as the following instructions:
• To connect the audio cable:
To connect the audio cable:
To connect the audio cable:
To connect the audio cable: connect one end of the audio cable to
To connect the audio cable:
the monitor's Audio-in port, and then connect the other end to the
computer multi-media (or audio) card's audio output.
To connect the power cord:
To connect the power cord:
• To connect the power cord:
To connect the power cord:
To connect the power cord: connect one end of the power cord
securely to the monitor's AC input port, the other end to a power outlet.
• To connect the VGA/DVI cable:
To connect the VGA/DVI cable:
To connect the VGA/DVI cable:
To connect the VGA/DVI cable:
To connect the VGA/DVI cable:
a. Plug the VGA/DVI connector to the LCD monitor's VGA/DVI port.
b. Connect the other end of the VGA/DVI cable to your computer's
VGA/DVI port.
c. Tighten the two screws to secure the VGA/DVI connector.
2 2 2 2 2
Q u i c k S t a r t G u i d e
Q u i c k S t a r t G u i d e
Q u i c k S t a r t G u i d e
Q u i c k S t a r t G u i d e
Q u i c k S t a r t G u i d e
3 3 3 3 3
3 3 3 3 3
Publicidad
Tabla de contenido
