Connecting The Cables - Asus VW222xR Serie Guía De Instalación Rápida

Assembling the monitor base
To assemble the monitor base:
. Have the front of the monitor face down on a table.
2. Connect the base with the arm according to the below drawing. A click shows
that the base has been connected successfully.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.

Connecting the cables

1. Connect the cables as the following instructions:
To connect the audio cable: connect one end of the audio cable to the
•
monitor's Audio-in port, the other end to the computer's audio-out port.
To connect the power cord: connect one end of the power cord securely to
•
the monitor's AC input port, the other end to a power outlet.
To connect the VGA/DVI cable:
•
a. Plug the VGA/DVI connector to the LCD monitor's VGA/DVI port.
b. Connect the other end of the VGA/ DVI cable to your computer's VGA/
DVI port.
c. Tighten the two screws to secure the VGA/DVI connector.
. Gather all the cables with the cable hook.
Cable hook
Quick Start Guide 3