Ickle Bubba Moon Manual Del Usuario página 6

Assembly - Installing the Front Wheels
1. Push each front wheel onto
the front wheel bayonet until
you hear a 'click'. Ensure it is
securely attached to the stroller
before use.
Assembly - Using the Bumper Bar
1. Align the bumper bar with the
fitting on the frame and push
inwards until you hear a 'click'
on each side and see the safety
release buttons are in the raised
position.
06
2. To remove the front wheels,
locate the release button which
can be found at the top of the
wheel bayonet, on the inner
side. Push the button in firmly
and the wheel will disengage.
2. To remove, press each of the
safety release buttons (indicat-
ed above) and pull the bumper
bar outwards.
v.02.20
Release
Button