Aqua Marina BETTA BE-312 Guía De Usuario página 9

SEAT INSTALLATION
BETTA
Use the seat straps to clip each strap to the D-rings. Attach the upper straps to the front D-rings.
STEAM
1. Attach the Velcro base to the kayak floor.
2. Use the seat straps to clip each strap to the D-rings. Attach the upper straps to the front D-rings.
D
KAYAK FIN INSTALLATION
Turn the kayak over and slide the kayak fin into the base. It only slides in facing one way.
Slide in the push-in pin into the grove until it clicks into the position.
WHEN USING THE KAYAK IN FLAT-WATER, SCREW THE DRAIN CAPS DOWN
TIGHTLY. OPEN THE CAPS BEFORE ENTERING WHITEWATER. THE KAYAK WILL
BE PARTIALLY FILLED WITH WATER WHEN THE DRAIN VALVES ARE OPEN.
TIPS:
WHEN OPENING THE DRAINS, TUCK THE CAPS UNDERNEATH THE INFLATABLE
FLOOR SO THEY DO NOT BLOCK THE OPENING AS WATER DRAINS OUT.
E
HIGH PRESSURE VALVE
9
FLOOR AIR VALVE