Assembly And Installation - Altair AL-2163 Manual De Instrucciones

ASSEMBLY AND INSTALLATION:

ASSEMBLY (Fig. 1)
1. Remove the decorative nut from the top of the nipple on the fixture.
2. Make sure the bottom cap is over the nipple on the fixture, followed by the top cap.
3. Place the decorative arm over the nipple on the fixture and line up the decorative
arm and the hole in the back plate of the fixture.
4. Thread the arm screw through the hole in the back plate of the fixture and secure the
decorative arm in place.
5. Thread the decorative nut back onto the nipple on the fixture to secure the top
assembly together.
DECORATIVE ARM
ARM
SCREW
4
DECORATIVE NUT
TOP CAP
BOTTOM CAP
NIPPLE
FIXTURE
Fig. 1