Using The Utility; Setting Method; Settings - Pioneer SEP-C1 Manual De Instrucciones

Controlador de software multimedia
Ocultar thumbs Ver también para SEP-C1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133

USING THE UTILITY

USING THE UTILITY
Press the UTILITY button to display the UTILITY screen and make unit settings.

SETTING METHOD

1
Use the function buttons to select the item you wish to set
[DISPLAY/PC/LANGUAGE/GENERAL].
2
Rotate the rotary selector dial to align the cursor with the
desired setting item.
3
Press either the select down () button or the rotary selector
dial to move the  icon to the right side.
4
Turn the rotary selector dial to select the desired setting
value.
5
Press the rotary selector dial to confirm the new setting
value.
Also, to reset a setting to its default value, press the select up
() button.
MEMO
• Grayed-out CD-G and BROWSE cannot be set on this unit.
All manuals and user guides at all-guides.com
Function buttons
BROWSE
MIX
Rotary selector dial
UTILITY
EFFECT
UTILITY
Select down ( ) button

SETTINGS

[1] DISPLAY
Use to perform settings for center display and external output.
LCD BRIGHTNESS Displays brightness of center
display.
OEL BRIGHTNESS Displays brightness of
display A/B.
LED BRIGHTNESS Displays brightness of LEDs.
*1
SCREEN SAVE
After the set time without
user operation, the LCD and
OEL screens are dimmed in
order to preserve the
displays.
TV STANDARD
Sets signal format for
monitor output (PAL, NTSC
(7.5 IRE), NTSC (0 IRE).
MONITOR OUT
Sets center display aspect
ratio to letterbox, full-screen,
or OFF.
*1 Screen saver operation
• The screensaver operates when five minutes have passed
without a track being loaded in either controller.
• The screensaver also operates after 100 minutes passes
without any button input when either one or both of the
controllers is in pause mode (including cue standby or END
display).
• The screen saver is disabled when a track is set with DJ
software other than DJS.
• During operation of the screensaver, pressing a button or
performing any other command operation will cancel the
screensaver.
[2] PC
The MIDI channel can be set (P. 22).
Factory
default setting
ON
NTSC (7.5
IRE)
OFF
25
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido