Wall Mounting - IRIS RC8221 Manual Del Usuario

RC8221 Iris
™
Camera
Mounting the Camera (Optional)
Note: Please ensure the camera is configured and added to the network

Wall Mounting

Step 1: Install mount screws
a. Mark two points at the same height from the ground, where you would like
b. Screw in 2/3 of the length of the mounting screws into the wall.
Step 2: Mount the camera
a. Hook the mounting holes located at the bottom of the camera's stand into
Step 3: Complete the camera's mount
a. Make sure the camera is firmly fixed on the wall.
b. Adjust the camera to the preferred position.
Note: The camera can also be placed on a table using the stand provided.
before permanent mounting.
to mount your camera.
the mounting screws.
5