Intended Use - BDS BGS 9319 Manual Del Usuario

Camshaft Mounting Tool Set for VAG and Porsche
TOOLS
1 Camshaft Locking Tool,
to be used as OEM T40094/11
2 Camshaft Holder,
to be used as OEM T40094/7
3 Camshaft Holder,
to be used as OEM T40094/1
4 Camshaft Mounting Tool,
für VAG 6- & 8-Zyl. TDI,
to be used as OEM T40095
5 Alignment Clamp, big,
to be used as OEM T40096/1
6 Alignment Clamp, small,
to be used as OEM T40096
7 Camshaft Holder,
to be used as OEM T40094/2

INTENDED USE

This tool set is made for mounting camshaft in correct position. The tool set consists of a mounting
device including different camshaft holders, blocking devices and alignment clamps.
The included tools are suitable for models from manufacturers Audi, Porsche, Seat, Skoda and
Volkswagen with 1.2, 1.6, 2.0, 2.7, 3.0, 4.0 and 4.2 TDi Common Rail Diesel engines as off 2003 with
e.g. engine codes:
ASB, ASE, BKN, BKS, BMK, BNG, BPP, BSG, BTR, BUG, BUN, BVN, CAAA, CAAB, CAAC, CAAD,
CAAE, CAGA, CAGB, CAGC, CAHA, CAHB, CAMA, CAMB, CANA, CANB, CANC, CAND, CAPA,
CARA, CASA, CASB, CASC, CASD, CATA, CAYA, CAYB, CAYC, CAYD, CAYE, CBAA, CBAB,
CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CCFA, CCFC, CCHA, CCHB, CCLA, CCMA, CCWA,
CCWB, CDBA, CDCA, CDSB, CDTA, CDTB, CDUC, CDUD, CDYA, CDYB, CDYC, CEGA, CEXA,
CFCA, CFFA, CFFB, CFFD, CFFE, CFGB, CFGC, CFGD, CFHA, CFHB, CFHC, CFHD, CFHE,
CFHF, CFJA, CFWA, CGKA, CGKB, CGLA, CGLB, CGLC, CGLD, CGLE, CGQB, CJAA, CJCA,
CJCB, CJCC, CJCD, CJGA, CJGC, CJGD, CJMA, CKDA, CKTB, CKTC, CKUB, CKUC, CKVB,
CKVC, CLAA, CLAB, CLCA, CLCB, CLJA, CLLA, CLNA, CLZB, CMEA, CMFA, CMFB, CMGB,
CMHA, CNEA, CNFA, CNRB, CRCA, CSHA, M05/9D (CAS), M05/9E, M05/9E (CRCA), M05/9E
(CRCB)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
8 Camshaft Holder,
to be used as OEM T40094/5
9 Camshaft Holder,
to be used as OEM T40094/3
10 Camshaft Holder,
to be used as OEM T40094/4
11 Camshaft Holder,
to be used as OEM T40094/10
12 Camshaft Holder,
to be used as OEM T40094/6
13 Camshaft Holder,
to be used as OEM T40094/9
14 Mounting Device,
to be used as OEM T40094A
15 Camshaft Adjustment Ruler,
to be used as OEM T40094/8
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9319
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed