Package Contents - Steren SWI-108 Manual Del Usuario

Before using your new 10/100/1000 Ethernet switch 8 port,
please read this instruction manual to prevent any damage.
Put it away in a safe place for future references.
The following contents should be found in your box:
• One Switch
• One AC power Adapter
• This User Guide
OVERVIEW OF THE PRODUCT
The SWI-108 features a non-blocking switching architecture that
forwards and filters packets at full wire-speed for
maximum throughput. MAC address auto-learning and
auto-aging, IEEE802.3x flow control for Full Duplex mode and
backpressure for Half Duplex mode. It is compatible with all
10,100, and 1000Mbps Ethernet devices because it is
standard-based, it protects your existing network investments
while providing you with a straightforward migration path to faster
Gigabit speeds.
It's plug-and-play and no configuration is required. Auto
MDI/MDI-X cable detection on all ports eliminate the need for
crossover cable or Uplink port. Each port can be used as general
ports or Uplink ports, and any port can be simply plugged into
a server, a hub, a router or a switch, using the straight cable or
crossover cable. Diagnostic LEDs which display link status and
activity, allowing you to quickly detect and correct problems on
the network.
Fully Complies with IEEE802.3, 802.3u and 802.3ab standards
5/8 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting
Auto- MDI/MDIX
Supports IEEE802.3x flow control for Full Duplex mode and
backpressure for Half Duplex mode

PACKAGE CONTENTS

FEATURES
ENGLISH-2