Preparing For Use - PDP Snap Remote Manual De Instrucciones

WARNING
Before using this product, carefully read this
•
manual and keep it for future reference.
Additionally, read the instructions for the
PlayStation
Do not handle damaged or leaking batteries.
•
WHAT YOU CAN DO WITH THE
SNAP REMOTE
• The Snap Remote uses Bluetooth
technology to operate your PS4
to control the playback of common types of
media, including Blu-ray Disc

PREPARING FOR USE

Remove the battery cover on the rear of the
Snap Remote and insert 2 AAA batteries. Make
sure the batteries are in the correct position.
OPERATING THE PS4
Check the PS4
To use the Snap Remote, the PS4
software must be version 3.0 or later. You can
check the system software version by selecting
Settings -> System -> System Information.
Pairing the Snap Remote with a PS4
This operation is performed only once, when you
are using the Snap Remote for the first time.
1. Turn on the PS4
2. Using a connected controller, select
Settings -> Devices -> Bluetooth Devices
from the PS4
3. Press the PS button once to active
the remote.
4. Next, press and hold the SHARE button and
the PS button simultaneously until the red LED
begins to flash.
SHARE &
PS button
LED
4 system.
®
system software version
™
system.
™
system menu.
™
wireless
®
system and
™
media.
™
SYSTEM
™
system
™
system
™