Initial Start-Up - Termozeta mixer 500 inox Libro De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ASSEMBLING/DISASSEMBLING OF THE APPLIANCE
Always make sure plug (6) is disconnected from
the power outlet.
• Assemble the hand blender (2) on the motor unit
(1) by making the grooves of hand blender (2) match
with release buttons (6).
INSTRUCTIONS FOR USE
Before using the appliance, disassemble and wash the blending shaft with the blade (2).
Use normal dishwashing detergent since it comes into contact with food during use (refer
to the section on "cleaning").

INITIAL START-UP

• Completely unwind the power cord (6) and connect the plug to a power outlet.
• Introduce the food cut into pieces inside the recipient.
• Introduce the blending (2) shaft into the recipient and press one of the two ON buttons (first
or second speed depending on the type of preparation) to start the appliance.
• Release the ON button to stop the appliance.
• After use, extract the blending shaft from the recipient and disconnect the plug from the
power outlet.
METHOD OF USE AND PRACTICAL HINTS
• Use the mixer to prepare sauces, soups, mayonnaise, baby food, milk shakes and cocktails.
• The recipient used must be two-thirds full to prevent spills.
• For the correct functioning, the preparation must cover at least the lower part of the
blending shaft.
• When blending hot food make sure to remove the cooking recipient from the heat source
to avoid dangerous overheating.
• To prevent spattering, only start the appliance after having placed it inside the container.
• Before blending and mixing food of medium consistency, it is recommended to first cut
them into small pieces and then add the liquid, e.g. broth.
ENGLISH
10
1
6
2

Publicidad

Tabla de contenido
loading

Tabla de contenido