auna AMP-2 BT Manual Del Usuario página 10

Back
17
15 16 18
19
15 AUX: Connect your AUX signal here.
16 DVD input: Connect your DVD signal here.
17 Line output: Connect this output to the passive input of another amplifier or active speaker.
18 Main speaker : Connect the main speakers here.
19 Power connection 230 V
BT connection
To play BT signal, enable the BT function on a BT device like cell phone and set the amplifier to BT
input mode and then search for available BT devices nearby on cell phone. The BT name of the
speaker is "Amp-2 BT". Pair and connect. There is no pairing code.
Note: The Amp-2 BT is only discoverable when input is set to BT.