Descargar Imprimir esta página

Conceptronic CBTHS2 Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
ENGLISH
Product care
Use of non-original accessories may result in performance deterioration, injury, products'
-
damage, electronic shock, and warranty termination.
Attempt to disassemble your Headset may damage it, and the warranty will be void.
-
Do not put the Earbridge in a dusty place.
-
Use only a clean soft cloth to clean your Headset.
-
When the Earbridge is not in use, always keep it in its case.
-
Do not allow children to play with your Earbridge, as they may injure themselves and
-
damage the Earbridge as well.
Do not place the Earbridge in extremely hot or cold temperatures.
-
Children
Do not allow children to play with your Headset, as the small parts may cause a choking
hazard.
Travel Charger
The charger is designed for indoor use only. Do not use it for outdoors.
The charger must be connected to the designated power sources as marked.
When removing the charger from an outlet, never pull the charger cord, as it may
damage the charger.
Battery Information
- New batteries
For first time use, plug the adapter into the Headset and charge it at least 4 hours
-
until the red indicator turns off.
- Battery care
Only qualified Service Centers are authorized to remove or replace the battery.
-
The rechargeable battery has a long service life if treated with care.
-
The battery can only be charged in a temperature range of –10 C to 45 C.
-
-
Use the battery in room temperature for maximum battery capacity.
The battery capacity may be reduced if operating in a cold environment.
-
The Headset has to be recharged every two months, when it is not in use during a
-
long time.
About Pairing
What is Pairing?
Pairing is a process of associating Bluetooth devices with each other. It will establish a
permanent security link between the devices and enable quick access to the services
provided without the need to enter passkeys.
Bluetooth Passkey
Each Earbridge has a default passkey 1234 for pairing, which is stored in its internal memory.
You are usually required to enter the passkey 1234 in a pairing process with a Bluetooth
mobile phone or other devices, however it depends on the kind of Bluetooth device that the

Publicidad

loading