3.2 Preparation for Web management
Before you attempt to use the embedded web interface to manage switch operation, verify
that your JetNet switch is properly installed on your network and that every PC on this
network can access the switch via the web browser.
3.2.1 Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
3.2.2 Type http:// 6710G_IP_Address (The default IP address is 192.168.10.1.), then
press Enter.
3.2.3 The login screen will appear next. Type-in the user name and the password. The
default user name and password is admin/admin.
3.2.4 Click OK, and then the welcome page of the web-based management interface will
appear.
At the left column of the Web management interface are listed the available software
features; by pressing the ring column you can also view the detailed configuration
interface.
For more detailed management features please refer to the software's users' manual.
The software user manual can be downloaded from Korenix Website as below:
http://www.korenix.com/downloads.htm