Basic Settings; Alarm; Activating Or Deactivating The Alarm; Snooze - Auriol 4-LD4166 Indicaciones Sobre Su Utilización Y Su Seguridad

Basic settings

The following basic settings can be adjusted: time
zone, hours, minutes, year, month, day and language
of the day of the week display. Press and hold MODE
14 for about 3 seconds in normal time display mode.
The time zone will blink and can be set by pressing
15 or 13. Press MODE 14 to confirm your setting.
Please note: If you are in a country, in which the clock
displays the wrong time even though it can receive the
time signal, please use the time zone adjustment to use
your alarm clock in a time zone other than the
standard time zone (UTC+1 = Central European Time).
Set the difference in hours (- 01 for example) to the
desired time zone. Restart radio reception after
changing this setting. Your clock receives the DCF77
time signal but will show the adjusted time (1 hour less
for example).
Set the hours, minutes, year, month, day and language
of the day of the week display in the same way. The
following languages are available: GER = German,
FRA = French, ITA = Italian, NET = Dutch, ESP =
Spanish, DAN = Danish, ENG = English. Press MODE
14 to confirm your setting.
- 33 -

Alarm

The alarm clock has 2 alarms which can be set
separately. Alarm 1 and Alarm 2.
Press and hold SET 16 or
time setting mode. The hour will blink on the display.
Press 15 or 13 to set the hour and confirm
your setting by pressing MODE 14. Set the minutes
and the days of the week in the same way. The
following days of the week are available: M-S =
Monday through Sunday, M-F = Monday through
Friday, S-S = Saturday through Sunday.

Activating or deactivating the alarm

Press SET 16 or SET 12 in normal time display
mode to activate or deactivate alarm 1 or alarm 2. The
bell symbol 5 or appears when an alarm is
activated.

SNOOZE

When the alarm sounds, press SNOOZE/LIGHT 4 on
the top of the alarm clock. The light will be activated
Z
briefly, Z and the bell symbol will blink on the display.
The alarm is briefly deactivated and will sound again
SET 12 to enter alarm
- 34 -