Advanced Functions - Promax DT-301 Guía Rápida De Configuración

QUICK CONFIGURATION GUIDE. DT-301/302
Transport Stream Process
Basic Functions

Advanced Functions

(Only available when connecting to DT-1XX modulator)
TS Output
Type:
Connector:
Packets:
Power supply
Connector
Voltage and highest
Consumption
Operating environmental conditions
Altitude
Temperature range
Max. Relative humidity 80% (up to 31 °C), decreasing lineally up to
Mechanical features
Dimensions
Weight
3
It is recommended to use the module CAM DT-902 for other types of CAM.
4
Double TS outputs deliver 2 copies of the same TS. Combining them with a DT-1xx modulator,
allows distributing easily various services from a TS in 2 different output multiplexes, but only
using one receiver.
11/2011
Simultaneous decryption of multiples services
using a proper CAM module. (See DT-902)
Selection of decrypted services by name.
Selection of Services by name or streams
filtering by PID.
Automatic Regeneration of PAT and SDT tables.
Distribution of TS services among various output
multiplexes 2 .
Adaptation of the NIT table: NID (Network
IDentifier) editable.
Management of LCN (Logic Channel Number) for
each module and each service.
1 (DT-301) or
DVB-ASI double output/s
BNC female, 75 Ω.
TS Packets of 204 bytes length.
Through the DT-800 Control Module in local
(keypad) or remote mode (PC).
JST B08P-XL-HDS (connecting cable supplied
with DT-800)
+12 V , <0,55 A.
+5 V, <1,4 A.
Up to 2000 m.
From 5 °C to 50 °C.
20% at 50 ºC.
W. 50 x H. 262 x D.230 mm.
1.28 kg.
2 (DT-302) independent
4
3
Page 3