Fulgor Milano FVCD 270 Manual De Montaje página 38

Remove the adhesive tape film from the panel (Fig. 1) position the unit slide ensuring correct
10
upper, lower and side alignment (Fig. 2 and 3).
Pull out the drawer and mark the holes on the slide (Fig. 4) then proceed to fixing with wood
screws (not included).
Additional adjustment can be made using the slotted holes on the front panel of the machine
(Fig. 6).
38
Fig. 1
Fig. 3
Fig. 5
Assembly Instructions
Fig. 2
Fig. 4
FVCD 270