MAINTENANCE AND CLEANING
1. Emptying the dust container
Press the dust container removal
button and remove the dust con-
tainer.
Press the release button of the
lower cover of the container and
empty it of the accumulated dust
(Fig. 11)
2. Cleaning the inlet HEPA filter
The HEPA inlet filter and the out-
let filter should only be cleaned if
there is a noticeable drop in the
suction capacity.
Take out the dust container and
remove the HEPA filter, clean it,
and then attach the filter after it
has dried (Fig. 12)
3. Removing the outlet filter
Press the button on the outlet
filter grill and remove the micro-
filter (Fig. 13).
4. Cleaning the outlet filter
After removing the outlet filter, it
must be carefully rinsed under
running clean water. Let it dry
thoroughly (Fig. 14).
8
EN
Fig. 11
Fig. 12
Fig. 13
Fig. 14