Before Starting; Connections - Wilks USA TX625i Guia De Inicio Rapido

TX625i

Before starting

Note: the washer will automatically shut down if insufficient oil is detected.
OFF
Add fuel:
1. Open the filler cap
2. Fill with unleaded petrol
up to the filter
3. Replace filler cap

Connections

1. Connect the supplied hose to the gun 'A' and pump outlet 'B'
2. Connect a mains supply hose to the water inlet 'C'
6
Add oil:
1. Locate the filler bungs on either side of the engine
2. Place washer on a level surface
3. Open the oil filler bung
4. Fill with 10W-40 semi-synthetic oil up to the threads
5. Replace oil filler bung
A
C
© Wilks-USA
English
UPPER LEVEL
B