Drawing From A Barrel; Nozzles - Wilks USA TX625i Guia De Inicio Rapido

English
TX625i

Drawing from a barrel

First ensure the machine is switched off before connecting / disconnecting any hoses
or attachments. Instead of attaching the hose from pump to tap, use the supplied hose
and filter set placing the filter end in the water supply.
It is advised that the water supply is on the same level as the washer. If you struggle to
get initial suction, remove the outlet hose from the pump and try drawing again - this
reduces the pressure on the pump making it easier to draw. Once flowing, turn engine
off and reconnect outlet hose before re-starting.

Nozzles

0°Nozzle (Red) - This nozzle delivers a pinpoint stream of pressurized water and is
extremely powerful. It should only be directed at surfaces that can withstand high
pressure such as metal or concrete.
15° Nozzle (Yellow) - This nozzle delivers a powerful 15-degree spray pattern for
intense cleaning of small areas. This nozzle should only be used on areas and materials
that can withstand very high pressure.
25° Nozzle (Green) - This nozzle delivers a 25 degree spray pattern for intense
cleaning of larger areas. This nozzle should only be used on areas that can withstand
very high pressure.
40° Nozzle (White) - This nozzle delivers a 40-degree spray pattern and a less
powerful stream of water. This nozzle can cover a wide area and can be used for most
general cleaning jobs.
Detergent Nozzle (Blue/Black) - This nozzle is used to apply detergent and cleaning
solutions. This nozzle produces the weakest pressure of the three nozzles.
9
© Wilks-USA