Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Other Features
Vent Fan
The vent fan removes steam and
other vapors from surface cooking.
Press Vent Fan once for boost fan
speed, twice for high fan speed, a third time for medium
fan speed, a fourth time for low fan speed, and a fifth
time to turn the fan off.
Surface Light
Press Surface Light to turn the
surface light on or off.
On some models, there is a night light
option.
Press Surface Light once for high light, twice for low
light, and a third time to turn the light off.
Mute
The beeper sound level can be muted.
Press Mute On/Off.

Automatic Fan

An automatic fan feature protects the microwave from
too much heat rising from the cooktop below it. It
automatically turns on at low speed if it senses too much
heat.
If you have turned the fan on you may find that you
cannot turn it off. The fan will automatically turn off when
the internal parts are cool. It may stay on for 30 minutes
or more after the cooktop and microwave controls are
turned off.
Clock Mode
You can change clock 12/24 hrs
display mode.
1. Press Settings.
2. Press Express Cook pad 1.
3. Select 12hrs/24hrs.
1 - 12 hrs
2- 24 hrs
49-7000119 Rev. 0
Display Speed
You can change display speed.
1. Press Settings.
2. Press Express Cook pad 2.
3. Select new display speed.
1 - slow
2 - normal
Sound Level
You can change sound level.
1. Press Settings.
2. Press Express Cook pad 3.
3. Select sound level.
0 - mute
1 - low
2 - normal
3 - loud
Reset Filter Button
The light will illuminate after
approximately 6 months of alert user
to replace the charcoal filter (if used)
and clean/replace the grease filters.
Reset by push and hold 3 seconds.
Filter Replace Reminder
The charcoal/grease filter should be replaced when it is
noticeably dirty / discolored(usually after 6-12 months,
depending on hood usage) or filter replacement LED is
on.
When the Filter Replace LED turned on, replace filter
and press Reset Filter and hold for 3 seconds to reset.
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido